Robert Rogge, QSTI Staff Engineer

Robert Rogge (Robby) began working at Bison in the summer of 2016. He obtained an Associates of Science degree at UM-Helena before earning a Bachelor of Science in Environmental Engineering at Montana Tech of the University of Montana. He also has successfully completed the Fundamental Engineering exam. While attending Montana Tech, he earned a broad-based science and engineering education including advanced courses in air and water pollution control, hazardous wastes, soils remediation, pollution prevention, health risk analysis, and land reclamation Overall, he gained a solid foundation by working in groups to solve real-world engineering problems and using

Robert Rogge, QSTI Staff Engineer2021-02-04T16:29:12-07:00

Kyle DeVerna, E.I.T., Q.I. Staff Engineer

Certifications: Mine Safety and Health Administration (MSHA) Kyle joined Bison in 2018 as a Field Services Engineer with the Billings Source Testing group. He has a B.S. in Civil Engineering from the Virginia Military Institute in Lexington, VA, and an M.S. in Environmental Engineering from Montana State University in Bozeman. As a member of the Source Testing group, Kyle conducts air emissions testing in accordance with EPA methods for both engineering and compliance purposes for a variety of clients. Kyle also performs equipment maintenance/repair, sample analysis, and protocol/report production. Prior to joining Bison, Kyle taught junior

Kyle DeVerna, E.I.T., Q.I. Staff Engineer2021-02-04T16:23:48-07:00

Jacob Rankin, Q.I. Staff Engineer

Certifications: Source Evaluation Society (SES) member MSHA certified with Emergency Response and First Aid (CPR/AED) training Jacob joined Bison in October 2018 to work on the emissions testing group in Helena. Having graduated from Montana State University with a Bachelor of Science in Chemical Engineering just prior to starting at Bison Engineering, his only experience is in industrial source emissions testing. With his degree in Chemical Engineering he has working knowledge of many common industry practices including but not limited to boilers, distillation columns, digesters, and separation units. Jacob looks forward to improving his expertise of

Jacob Rankin, Q.I. Staff Engineer2021-02-04T16:26:02-07:00

Jake Amerman, QSTI Staff Engineer

Certifications: QSTI 10 Hour OSHA Visible Emissions Evaluator for Method 9 Mining Safety and Health Administration (MSHA) Jake joined Bison in 2018 as a Staff Engineer with the Billings Source Testing group. He has a B.S. in Chemistry and an M.B.A. from the University of Denver. Jake has extensive knowledge and experience in flow measurement and stack emission measurement and calculations. Jake has passed all four QSTI (Qualified Stack Test Individual) exams. Passing these exams proves Jake’s dedication to quality stack testing services. The QSTI exams test an individual’s knowledge regarding the various EPA mandated testing

Jake Amerman, QSTI Staff Engineer2020-06-22T12:22:00-06:00

Lynn Dunnington Environmental Analyst

Certifications: Mine Safety and Health Administration (MSHA) Parts 46 and 48 certification Lynn joined Bison Engineering in March of 2019. She works with the source testing group based out of Helena. Lynn has a Bachelor of Arts degree in zoology from the University of Montana. Her primary responsibilities at Bison include data processing, analysis and quality assurance, and report writing. Lynn has over 12 years of experience in air quality monitoring and consulting. Before joining Bison, Lynn worked primarily with ambient air monitoring contracts. She has extensive experience in data analysis and quality assurance; report writing;

Lynn Dunnington Environmental Analyst2019-04-23T21:44:54-06:00

Angel Medina, Q.I. Environmental Scientist

Certifications: Mining Safety and Health Administration (MSHA), 10 hour Occupational Health and Safety Administration (OSHA), Visible Emissions Evaluator for Method 9. Angel joined Bison in 2019 as a Staff Scientist with the Tucson Field Source Testing group. He has a B.S. in Environmental Science with an emphasis in Biology from the University of Arizona. As a member of the Source Testing group, Angel conducts air emissions testing in accordance with EPA methods for both engineering and compliance purposes for a variety of clients. Angel also conducts maintenance/calibration operations on scientific equipment used in the field, sample/glassware

Angel Medina, Q.I. Environmental Scientist2021-02-04T16:25:14-07:00

Jeremy Clark, Staff Scientist

Certifications: 10 Hour Occupational Health and Safety Administration (OSHA) QSTI Group 1 QSTI Group 2 QSTI Group 3 Jeremy Clark joined Bison in January of 2021 as a Staff Scientist with the Tucson Field Source Testing group. He has a B.S. in Natural Resources and Environmental Sciences, with a specialization in Human Dimensions from the University of Illinois. As a member of the Source Testing group, Jeremy conducts air emissions testing in accordance with EPA methods for both engineering and compliance purposes for a variety of clients. He has led projects utilizing FTIR instrumentation for volatile

Jeremy Clark, Staff Scientist2021-05-24T06:35:12-06:00

Jackson Wilkins Environmental Scientist

Jackson joined Bison in 2021 as a member of the Source Testing group. He has a Bachelor of Science in Physics from Beloit College and is an environmental scientist in the Helena office. Prior to joining Bison, Jackson has been working as a manufacturing engineer focusing on efficiency and repeatability in the manufacturing of Augmented Reality glasses for Meta in Silicon Valley. More recently he led the service team for Montana instruments, based in Bozeman Montana, installing and maintaining cryogenic systems across the US. He hopes to bring his love for technology to the air quality realm and

Jackson Wilkins Environmental Scientist2021-12-21T09:45:56-07:00

Joanne Sufi, E.I., Q.I., Staff Engineer

Joanne originally joined Bison in 2015, worked for Pima County for 18 months, and rejoined Bison in October 2021. She began work for EEMC in 2008 as a report writer and gradually gained field experience in source testing, becoming a QSTI in groups 1 and 3. After joining Bison, she also became a QI in group 4. Joanne has a BS in Mechanical Engineering from the University of Iowa and is an Engineer in Training. Her previous engineering experience was in computer software development with additional experience in process engineering for television manufacturing and R&D. For Bison, Joanne

Joanne Sufi, E.I., Q.I., Staff Engineer2021-12-20T23:10:19-07:00
Go to Top